Foshan Haomei Machinery Technology Co., Ltd. is a fully automatic edge banding machine, semi-automatic edge banding machine, curved line edge banding machine, portable edge banding machine, multi-row drill, double-row drilling rig, three-row drilling rig, four-row drilling rig, and five-row drilling rig , Six-row drilling rigs, woodworking hinge drills, precision sliding table saws, chamfering machines, and other products of Foshan machinery manufacturers, today show you how the edge banding machine works!

       The automatic linear edge banding machine is automatic, efficient, high-precision and beautiful. It has been widely used in domestic panel furniture manufacturers. The tracking repair device of the automatic linear edge banding machine is also a great improvement experience in the linear edge banding machine technology!

       The tracing trimming device has two sets of trimming knife shafts distributed above and below the work. The trimming milling cutter spindle is driven by a frequency conversion motor, the speed can reach 12000 rpm, and the power of each set of milling cutters is about 0.5KW. When the workpiece and the edge banding tape arrive at the tracking trimming station after pasting, sawing, and trimming, the tracking trimming device will quickly stick to the workpiece and perform profiling trimming according to the shape of the workpiece. When tracking trimming, the workpiece moves forward at a faster speed. The tracking trimming device must achieve rapid response and synchronous tracking, which has high requirements for mechanical appliances and high technical content. The tracking trimming device is equipped with a set of linear guide rails and fast-moving cylinders, which can make the movement of the entire device more flexible. The stroke of the fast cylinder is relatively short, so the response of the cylinder is extremely fast, which ensures that the tracking and trimming device works more accurately and quickly. The tracking trimming device is controlled by a group of PLC controllers. The equipment manufacturer has already set some technical parameters required for tracking in the PLC controller. The parameters that need to be adjusted are all digitally displayed. During operation, you only need to adjust the parameters such as the thickness of the edge banding, and the tracking trimming device can start trimming. When tracking trimming, this tracking trimming device is also a fixed precision trimming. If you don't need it to work, you can adjust the integer display parameters to remove it.

       When tracking trimming, the feed rate is generally constant. The feeding speed of various models is inconsistent. The feeding speed of FZ-450D is constant at 12m/min. When the feeding speed changes, the effect of tracking trimming is poor, or the trimming cannot be tracked.

       So you can pay attention to the operation or maintenance! If you can help you, you can call our company at any time, and Foshan Haomei Machinery Co., Ltd. is at your service at any time! Tel: Wang Qisong 13928288503 18928680955